- Introduction to the Different YubiKey Series
- View page source
Where applicable, throughout this guide, the YubiKey 5 Series, the YubiKey Bio Series, the YubiKey 5 FIPS Series and the YubiKey 5 CSPN Series are referred to collectively as the YubiKey 5 (FIPS/CSPN) Series. This label indicates that a certain specification or feature is available on all these Series. This is possible because they all share the same base hardware and many firmware features.
This topic introduces:
- YubiKey 5 Series
- YubiKey 5 FIPS Series
- YubiKey Bio Series
- YubiKey 5 CSPN Series
- Firmware
- Security Key Series
YubiKey 5 Series
About the YubiKey 5 Series
The YubiKey 5 Series security keys offer strong authentication with support for multiple protocols, including FIDO2, which is the new standard that enables the replacement of password-based authentication. The YubiKey strengthens security by replacing passwords with strong hardware-based authentication using public key cryptography.
For those who just want to use a YubiKey without programming anything, the most useful part of this guide is Understanding the USB Interfaces. This topic describes how the YubiKey connects and indicates what it can connect to.
For an overview on setting up two-step verification in a typical case, see Google on using a security key for 2-step verification.
The full list of the services that work with YubiKeys is on Yubico’s Works With YubiKey page.
Most of the rest of this guide targets systems integrators, IT teams, or developers who expect to integrate support for YubiKeys into their environment.
All the YubiKeys in the YubiKey 5 Series have the basic functionalities and capabilities described in this guide, with the Protocols and Applications chapter listing these by protocol:
- FIDO2
- Smart Card (PIV Compatible)
- OATH
- OpenPGP
- OTP
- YubiHSM Auth.
However, it is the firmware version that determines which of the more specialized functionalities and capabilities are available on your YubiKey. See Firmware.
YubiKey 5 FIPS Series
Why FIPS?
Federal Information Processing Standards (FIPS) are developed by the United States government for use in computer systems to establish requirements such as ensuring computer security and interoperability. The National Institute of Standards and Technology (NIST) and the Canadian Centre for Cyber Security (CCCS) run the NIST Cryptographic Module Validation Program (CMVP) as a collaborative effort.
FIPS certification demonstrates that a product has gone through a rigorous audit process and adheres to a security standard that can be measured and quantified.
Many government organizations and government contractors are required to use FIPS-approved products, as are highly-regulated industries in general. Other countries also recognize FIPS 140-2. For the U.S. government, the default is that FIPS is required.
Do You Require FIPS Keys?
If you do not have a security auditor, and/or the auditor does not have a compliance requirement, you probably do not need FIPS. The standard line of YubiKeys (the non-FIPS series) offers the same security, algorithms, and functionality. The standard line also evolves at a much more rapid pace because it does not need to complete an exhaustive validation process, which commonly takes a year or more. Yubico can release standard firmware with new features and enhancements at any time, whereas FIPS-certified products must go through the FIPS validation process every time there is a firmware change.
About the YubiKey 5 FIPS Series
The YubiKey 5 FIPS Series is FIPS 140-2 certified. It offers strong authentication with support for multiple protocols, including FIDO2, which is the new standard that enables the replacement of password-based authentication. The YubiKey strengthens security by replacing passwords with strong hardware-based authentication using public key cryptography.
The cryptographic functionality of the YubiKey 5 FIPS Series devices is powered by the YubiKey 5 cryptographic module, a single-chip cryptographic processor with a non-extractable key store that handles all of the cryptographic operations. The YubiKey 5 cryptographic module is FIPS 140-2 certified, both Level 1 and Level 2 (Physical Security Level 3).
The YubiKey 5 FIPS Series cryptographic module is a security feature that supports multiple protocols designed to be embedded in USB security tokens. The module can generate, store, and perform cryptographic operations for sensitive data. It is accessed through an external touch-button for Test of User Presence in addition to PIN for smart card authentication. The module implements the following major functions, depending on the firmware version on the YubiKey.
| Function | Firmware Versions | |
|---|---|---|
| 5.4.2 | 5.4.3 | |
| Yubico One Time Password (OTP) | yes | yes |
| OATH OTP authentication | yes | yes |
| OpenPGP (version 3.4) | yes | |
| PIV-compatible smart card | yes | yes |
| FIDO Universal 2nd Factor (U2F) | yes | yes |
| FIDO2 WebAuthn | yes | yes |
| YubiHSM Auth | yes | |
| SCP03 | yes | yes |
The YubiKey 5 FIPS Series hardware with the 5.4 firmware is certified as an authenticator under both FIPS 140-2 Level 1 and Level 2. It meets the highest authenticator assurance level 3 (AAL3) of NIST SP800-63B guidance. To use security keys from the YubiKey 5 FIPS Series as a Level 2, more stringent initialization is required than for Level 1. Guidance for Level 2 is detailed in Deploying the YubiKey 5 FIPS Series.
FIPS-specific Aspects of the YubiKey 5 FIPS Series
The table below lists the YubiKey 5 FIPS Series with the 5.4 firmware configuration changes that are set at programming. These are in addition to the configuration options available in the YubiKey 5 FIPS Series.
| Configuration Change | Description |
|---|---|
| Functional | Enforce power-up self-test (firmware integrity and algorithm testing) |
Minimum PIN length for FIDO2 | 6 alphanumeric characters |
Identification (FIDO) | Unique AAGUIDs for the FIDO Attestation (see AAGUID Values in FIDO2) |
| Attestation (FIDO) | Attestation certificates for FIDO include a FIPS OID (1.3.6.1.4.1.41482.12) |
FIDO GETINFO | Command returns a listing of FIPS, as well as the FIPS-specific OIDs in the PIV and FIDO attestation certificates (see Footnote 1). |
| Attestation (PIV) | Attestation certificates for PIV include the FIPS Form Factor identifier** in the Form Factor OID (1.3.6.1.4.1.41482.3.9) |
| YubiKey Manager | Form factor identifies FIPS Series devices (see Footnote 2). |
Footnote 1 The certifications that are supported by a FIDO authenticator can be returned in the certifications member of an authenticatorGetInfo response as set out in paragraph 7.3.1. Authenticator Actions of the Client to Authenticator Protocol (CTAP) Review Draft of March 09, 2021.
Footnote 2 Form factor is set during manufacturing and returned as a one-byte value. Currently defined values for this are set out in the Form Factor table below:
Form Factor | Standard YubiKey Value | Security Key Value, FW 5.4+ | FIPS YubiKey Value, FW 5.4+ |
|---|---|---|---|
| UNDEFINED | 0x00 | N/A | N/A |
| Keychain, USB-A | 0x01 | 0x41 | 0x81 |
| Nano, USB-A | 0x02 | N/A | 0x82 |
| Keychain, USB-C | 0x03 | 0x43 | 0x83 |
| Nano, USB-C | 0x04 | N/A | 0x84 |
Keychain with Lightning, USB-C | 0x05 | N/A | x85 |
YubiKey Bio Series
The YubiKey Bio Series offers the familiar YubiKey experience users have come to know and trust, but adds the convenience of a new biometric touch feature.
The series is comprised of two keys:
- The YubiKey Bio - FIDO Edition (USB-A form factor)
- The YubiKey C Bio - FIDO Edition (USB-C form factor)
Protocols Supported
Both keys in the YubiKey Bio Series support the FIDO authentication protocols, and work with sites and applications that support the FIDO2 and FIDO U2F protocols (for more information, see YubiKey Bio and FIDO2 and YubiKey Bio and FIDO U2F).
FIDO2 (sometimes referred to as WebAuthn) builds upon FIDO U2F, and is the standard that enables the replacement of password-based authentication.
The YubiKey Bio Series provides firmware applications to support two modes of authentication through the FIDO2 and U2F protocols (see YubiKey Bio and FIDO2 and YubiKey Bio and FIDO U2F). Even though the firmware applications are separate from one another, they both share the same PIN and FIDO reset capability, which is to say that a FIDO reset resets both applications. To manage these applications, see Tools.
Using the YubiKey Bio
For a quick start to using the YubiKey Bio Series, without a lot of details, see Yubico’s setup page.
This guide, the YubiKey Technical Manual, provides:
- An explanation of the way the YubiKey Bio works (see How the YubiKey Bio Works) and descriptions of the different user experiences with the various protocols (see User Experiences).
- Full instructions for enrolling fingerprints using platform support:
- Using Chrome to Enroll Fingerprints and
- Using Windows to Enroll Fingerprints
- Brief descriptions of the protocols supported, in:
- YubiKey Bio and FIDO2 and
- YubiKey Bio and FIDO U2F
- A brief explanation of the role the Yubico Authenticator plays in managing the YubiKey Bio.
Usage Notes
The YubiKey Bio implements biometrics as outlined in the CTAP 2.1 specification. The best user experiences are provided by the YubiKey Bio with client applications and browsers that also implement CTAP 2.1. Applications and browsers that implement CTAP 1 or CTAP 2.0 also work with the YubiKey Bio. However, the UI on client devices is not as intuitive and there might be some limitations.
Interfaces and Applications
Interfaces
Like all YubiKeys, the YubiKey Bio Series are USB 2.0 devices.
Note
Developers: The USB PID and iProduct string are 0x0402 and YubiKey FIDO respectively. See YubiKey USB ID Values.
Applications
All keys in the YubiKey Bio Series support WebAuthn sites and applications that support the FIDO2 and FIDO U2F protocols. For more information, see YubiKey Bio and FIDO2 and YubiKey Bio and FIDO U2F. FIDO2 (also known as WebAuthn) is the standard that enables the replacement of password-based authentication.
Each application can be enabled and disabled independently. Up to five fingerprints can be stored on a YubiKey Bio. For management, see Troubleshooting and Tools.
YubiKey 5 CSPN Series
Instructions on how to configure and use the YubiKey 5 in compliance with CSPN (“Certificat de Sécurité de Premier Niveau” [RD1]) are given in YubiKey 5 CSPN Series Specifics.
For each YubiKey application that requires specific configuration, there is a short introduction, the required settings to achieve the target, and a technical description of the configuration.
References
Firmware
For a summary overview of the firmware features, see Firmware Overview, which includes the capability matrices, listing the features and form factors available per firmware version for each of the products in the YubiKey 5 Series and the Security Key Series.
For more in-depth information about:
- the most recent firmware release, see 5.7 Firmware Specifics.
- the firmware prior to the current release, see Firmware Specifics Prior to 5.6.x
Note
Yubico periodically updates the firmware to take advantage of features and capabilities introduced into the ecosystem. YubiKeys are programmed in Yubico’s facilities with the latest available firmware and once programmed cannot be updated to another version. The firmware cannot be altered or removed from a YubiKey.
The firmware version on a YubiKey or a Security Key determines whether or not a feature or a capability is available to that device. The quickest and most convenient way to determine your device’s firmware version is to use either the Yubico Authenticator or the YubiKey Manager tool (ykman), a lightweight software package installable on many OS. The YubiKey Manager has both a graphical user interface (GUI) and a command line interface (CLI). For more information, see the .
NIST: FIPS
Yubico submitted the firmware for releases 5.4.2 and 5.4.3 to NIST and the organization approved the certification. The certificates can be found here. For more information about the YubiKey 5 FIPS Series, see YubiKey 5 FIPS Series Specifics.
ANSI: CSPN
Yubico submitted release 5.4.2 to ANSSI for certification and the organization approved the certification. For more information about the YubiKey 5 CSPN Series, see YubiKey 5 CSPN Series.
Security Key Series
The Security Key Series differs from a YubiKey 5 Series in that it comes only with the FIDO (FIDO2/FIDO U2F) protocol and the non-Enterprise Edition does not have a serial number. It is only available in USB-A + NFC and USB-C + NFC form factors.
The Security Key Series - Enterprise Edition is the same as the Security Key Series but includes a serial number to enable asset tracking. The serial number is on the back of the key and can also be read programmatically through the FIDO HID interface. It is only available in USB-A + NFC and USB-C + NFC form factors.
Capability | Security Key Series 5.0.x-5.4.x | Security Key Series - Enterprise Edition 5.4.x | Security Key Series 5.7.x | Security Key Series - Enterprise Edition 5.7.x |
|---|---|---|---|---|
| Serial Number | No | Yes | No | Yes |
Serial Number over CCID | No | No | No | Yes |
PIN Complexity | No | No | No | Yes |
Serial Number over CCID
The serial number of the Yubico Security Key is retrievable without Windows elevated privileges since the YubiKey Management Application is exposed over CCID. This change was introduced in 5.7.0.
Cookies | Privacy Policy
