FAQs on the German regulatory system for construction products and construction techniques
The German regulatory system for construction products and construction techniques is laid down in the 16 Building Codes of the federal states. These Building Codes are based on a common model – the Model Building Code (Musterbauordnung,MBO).
- pdf-Datei Musterbauordnung (MBO) 2002, geändert November 2023 (83 pages ) Fassung: November 2002 – zuletzt geändert durch Beschluss der Bauministerkonferenz vom 23./.24. November 2023
The Building Codes of the federal states define the general requirements for construction works. The approval procedure for construction products and the permit procedure for construction techniques are also laid down in the Building Codes. The general requirements for construction works contained in the Building Codes are specified by Technical Building Rules. There is also a common model for these:
- pdf-Datei Muster-Verwaltungsvorschrift Technische Baubestimmungen (MVV TB) 2021/1 (348 pages ) Ausgabe 2021/1; Amtliche Mitteilungen 2022/1 (Ausgabe: 17. Januar 2022 mit Druckfehlerberichtigung vom 4. März 2022)
Which provisions apply where and for what?
- The applicable provisions are generally those of the federal state in which the construction product is used or the construction technique applied.
- The Model Building Code and the Model Administrative Provisions – Technical Building Rules serve as templates for the corresponding federal state provisions. They are not directly applicable, but provide useful guidance.
You can see from the following document which version of the Technical Building Rules is applicable in which federal state:
- pdf-Datei Stand der Umsetzung der Muster-Verwaltungsvorschrift Technische Baubestimmungen (MVV TB) in den Ländern (2 pages ) Stand: 24. September 2024; DIBt
Pursuant to Section3(1) of the Model Building Code (MBO), structures must be arranged, erected, modified and maintained in such a way that public safety and order, in particular, human life, health and natural resources, are not endangered.
To clarify that the national requirements encompass the ones defined in the Construction Products Regulation (Regulation (EU) No305/2011), the second half-sentence of Section3(1) MBO refers to the basic requirements for construction works in accordance with AnnexI to said Regulation. The Annex lists the following basic requirements for construction works:
- Mechanical resistance and stability
- Safety in case of fire
- Hygiene, health and the environment
- Safety and accessibility in use
- Protection against noise
- Energy economy and heat retention
- Sustainable use of natural resources
Construction products are products, building materials, components and installations as well as construction kits which are manufactured in order to be permanently incorporated in construction works (buildings and other civil engineering works) and the use of which may have an impact on the requirements for construction works.
Construction products also comprise prefabricated structures made from products, building materials, components and kits which are manufactured to be connected to the ground (e.g. prefabricated houses, prefabricated garages and silos) and the use of which may have an impact on the requirements for construction works.
Cf. Section2(10) MBO.
A construction technique is defined as the process of assembling construction products to form construction works or parts thereof.
Cf. Section2(11) MBO.
A frequently asked question is what the difference between a kit and a construction technique is.
In the Construction Products Regulation, a kit is defined as a construction product placed on the market by a single manufacturer as a set of at least two separate components. These need to be put together in order to be incorporated in the construction works.
Cf. Regulation (EU) 305/2011, Article 2(2).
The construction technique, on the other hand, comprises the planning, design and execution of construction works.
Cf. Section2(11) MBO.
The use of construction products and the application of construction techniques may have an impact on the essential public interests which the Building Codes seek to protect – namely public safety and order, in particular life, health and natural resources. The Building Codes therefore set out that verifications of their fitness for use or application need to be provided in specific cases.
Construction products may only be used if, in view of their use, the construction works, when properly maintained, fulfil the legal requirements and are serviceable for a period of time appropriate to the purpose.
Construction techniques may only be used if, in view of their application, the construction works, when properly maintained, fulfil the legal requirements and are serviceable for a period of time appropriate to the purpose.
It is assumed in the Building Codes that this condition is met if the economic actors observe the relevant Technical Building Rules or generally recognised technical rules (see FAQs "What are Technical Building Rules?, "What are generally recognised technical rules?").
However, the responsible economic actors are free to deviate from the Technical Building Rules. In this case, however, they may have to provide verifications showing that their construction product or technique can be safely used or applied. This is where regulatory verifications of fitness for use or application, e.g. national technical approvals, come into play.
Cf. Section16a(1) and (2) MBO, Section16b(1) MBO, Section17(1)MBO and Section85a(1) Sentence3 MBO. See also FAQ "Which verifications of fitness for use or application exist?"
Construction products which comply with the requirements applicable in other signatory states of the European Economic Area may be used if the level of protection required in Germany for construction works can likewise be achieved with these products on a permanent basis.
Cf. Section16(2) MBO in conjunction with Section3 Sentence1MBO.
Construction products bearing the CE marking under the Construction Products Regulation may be used if the declared performance complies with the requirements for the specific use set out in the Building Codes or the laws enacted on the basis of the Building Codes.
Cf. Section16c Sentence1MBO.
We will explain below when verifications of fitness for use or application are required.
The Building Codes differentiate between the following verifications of fitness for use for construction products and fitness for application for construction techniques:
Verifications of fitness for use for construction products
- National technical approval (allgemeine bauaufsichtliche Zulassung, abZ)
- National test certificate for a construction product (allgemeines bauaufsichtliches Prüfzeugnis, abP)
- Project-related approval (Zustimmung im Einzelfall, ZiE)
Verifications of fitness for application for construction techniques
- General construction technique permit (allgemeine Bauartgenehmigung, aBG)
- National test certificates for a construction technique (allgemeines bauaufsichtliches Prüfzeugnis, abP)
- Project-related construction technique permit (vorhabenbezogene Bauartgenehmigung, vBG)
Note: According to the wording of the Model Building Code, construction products are used, while construction techniques are applied.
You need a national technical approval if
- there are no Technical Building Rules and no generally recognised technical rules for the construction product (see FAQs "What are Technical Building Rules?", "What are generally recognised technical rules?"),
- the construction product deviates significantly from the Technical Building Rules
(cf. MVV TB Chapter C 1) or - a legal provision stipulates so.
The most important tool for determining in a specific case whether the construction product requires approval is the Technical Building Rules. The provisions of the relevant federal state apply. However, as a first step you can refer to the Model Administrative Provisions – Technical Building Rules.
- pdf-Datei Muster-Verwaltungsvorschrift Technische Baubestimmungen (MVV TB) 2021/1 (348 pages ) Ausgabe 2021/1; Amtliche Mitteilungen 2022/1 (Ausgabe: 17. Januar 2022 mit Druckfehlerberichtigung vom 4. März 2022)
Exceptions
You do not need a national technical approval if
- the Administrative Provisions – Technical Building Rules provide for a national test certificate instead of an approval (cf. MVV TB Chapter C 3),
- the construction product is CE-marked under the Construction Products Regulation (cf. Section 16c Sentence 2 MBO and FAQ "Which provisions apply to harmonised construction products under the Construction Products Regulation?"),
- you only wish to use the construction product for one specific construction project and therefore opt for a project-related approval instead of a national technical approval (cf.Section20MBO),
- the construction product is included in the non-exhaustive list of products not requiring verification laid down in Chapter D2 of the Administrative Provisions – Technical Building Rules (construction products which are of lesser regulatory importance or which are, for example, covered by other certification or approval systems),
- there are generally recognised technical rules for the construction product (see FAQ "What are generally recognised technical rules?").
In most cases, you should be able to see by yourself from the Administrative Provisions – Technical Building Rules whether an approval or another verification of fitness for use is required for the construction product. For further non-binding guidance, please feel free to use our Information portal for construction products and techniques.
If you are still not sure whether or which verification requirements apply to the construction product, please send an email with detailed technical information on your product and its intended use to.
You need a general construction technique permit if
- there are no generally recognised technical rules for the construction technique (see FAQ "What are generally recognised technical rules?") or
- the construction technique deviates significantly from the Technical Building Rules.
The most important tool for determining in a specific case whether your construction technique requires a construction technique permit is the Technical Building Rules. The provisions of the relevant federal state apply. However, as a first step you can refer to the Model Administrative Provisions – Technical Building Rules on which the state provisions are based.
- pdf-Datei Muster-Verwaltungsvorschrift Technische Baubestimmungen (MVV TB) 2021/1 (348 pages ) Ausgabe 2021/1; Amtliche Mitteilungen 2022/1 (Ausgabe: 17. Januar 2022 mit Druckfehlerberichtigung vom 4. März 2022)
Exceptions
You do not need a general construction technique permit if
- the Administrative Provisions – Technical Building Rules provide for a national test certificate instead of a construction technique permit (cf. MVV TB Chapter C 4),
- you only want to use the construction technique for one specific construction project and therefore opt for a project-related construction technique permit instead of a general construction technique permit (cf.Section 16a(2) first sentence point2 of theMBO),
- the supreme building authority has generally determined that a construction technique permit is not required in a specific case or for clearly defined cases,
- there are generally recognised technical rules for the construction technique (see FAQ "What are generally recognised technical rules?").
In most cases, you should be able to see by yourself from the Administrative Provisions – Technical Building Rules whether a general construction technique permit or another verification of fitness for application is required for the construction technique. For further non-binding guidance, please feel free to use our Information portal for construction products and techniques.
If you are still not sure whether or which verification requirements apply to the construction technique, please send an email with detailed technical information on your construction technique and its intended application.
A national test certificate is issued for construction products and construction techniques which can be evaluated on the basis of generally recognised test methods. You can find an exhaustive list of these products in the Administrative Provisions – Technical Building Rules (cf.MVV TB ChaptersC3 and C4).
- pdf-Datei Muster-Verwaltungsvorschrift Technische Baubestimmungen (MVV TB) 2021/1 (348 pages ) Ausgabe 2021/1; Amtliche Mitteilungen 2022/1 (Ausgabe: 17. Januar 2022 mit Druckfehlerberichtigung vom 4. März 2022)
National test certificates can only be issued by testing laboratories which have been recognised for this purpose under the Building Codes of the federal states (cf. Section16a(3), Section19(2) and Section24 MBO). To find a recognised testing laboratory, consult Part III of the List of recongnised testing laboratories, inspection and certification bodies (PÜZ-Verzeichnis) linked below.
- pdf-Datei Verzeichnis der Prüf-, Überwachungs- und Zertifizierungsstellen nach den Landesbauordnungen (PÜZ-Verzeichnis) (100 pages ) Stand: 1. Januar 2024; Ausgabe 2024; Letzte redaktionelle Überarbeitung: 8. Mai 2024
A project-related approval is a kind of verification of fitness for use for construction products. You can apply for a project-related approval instead of a national technical approval if you only want to use the construction product for one specific construction project.
Project-related approvals are usually granted by the supreme building authority of the federal state in which the construction project is carried out.
Cf. Section20 MBO.
For construction projects in the state of Berlin, you can apply for aproject-related approval directly atDIBt
The competent authority may decree on a case-by-case basis that its approval is not required (waiver) if there are no foreseeable risks.
Cf. Section20 second sentenceMBO.
A project-related construction technique permit is a specific kind of verification of fitness for application for construction techniques. You can apply for a project-related construction technique permit instead of a national technical approval if you only want to use the construction product for one specific construction project.
Project-related construction technique permits are usually granted by the supreme building authority of the federal state in which the construction project is carried out.
Cf. Section16a(2) first sentence point 2 MBO.
For construction projects in the state of Berlin, you can apply for project-related construction technique permit directly atDIBt
The competent authority may decree that a construction technique permit is not requiredin an individual case or in specific, clearly defined cases (waiver) if there are no foreseeable risks.
Cf. Section16a(4) MBO.
In accordance with Section 85a of the Model Building Code, the general requirements for construction works can be specified by Technical Building Rules. The Technical Building Rules must be complied with. However, it is possible to deviate from the planning, design and execution rules contained in the Technical Building Rules if the requirements are met to the same extent by another solution and a deviation is not excluded in the Technical Building Rules.
Cf. Section 85a(1) MBO.
After consultation of the stakeholders and notification, DIBt publishes the Model Administrative Provisions – Technical Building Rules following the consensus of all federal states. The federal states transpose the model into state law. In doing so, they are not bound by the wording of the model. Some provisions are laid down in the MVVTB itself (see, for example, Chapter A 2 – Safety in case of fire), but in many cases reference is made to existing technical rules (see, for example, Chapter A 1 – Mechanical resistance and stability).
Generally recognised technical rules are rules that
- are based on scientific principles or practical experience,
- are recognised as correct by the majority of people working in the field, and
- are applied by the majority of the professionals.
Generally recognised technical rules may be codified – e.g. DIN standards, DVGW and VDE guidelines. However, they may also be established trade rules.
In cases in which there are generally recognised technical rules, no verification of fitness for use or application is required.
For construction products bearing the CE marking under the Construction Products Regulation (Regulation (EU)No305/2011), the national requirements for verification of fitness for use do not apply.
These construction products may be used if the declared performances correspond to the requirements for such use in Germany.
Cf. Section16c MBO.
In some cases, the national requirements for construction works are not fully reflected in the harmonised standards. For these standards, the building authorities have drawn up recommendations on how product performance can be stated on a voluntary basis in the technical documentation. Germany is committed to improving these standards as quickly as possible.For more information, consult the Priority list for the revision of deficient harmonised construction product standards (German, see below).
- pdf-Datei Prioritätenliste für die Überarbeitung defizitärer harmonisierter Bauproduktnormen (56 pages ) Ausgewählte verwendungsspezifische Leistungsanforderungen zur Erfüllung der Bauwerksanforderungen; Stand: 1. Juni 2021
If products bearing the CE marking under other EU harmonisation acts (e.g. the Machinery Directive) are used as construction products, their fitness for use may have to be verified. Compare, for example, the provisions in MVVTB Chapter B3.
The Building Codes of the federal states stipulate that the manufacturer must declare that his construction product complies with the Technical Building Rules, the national technical approval, the national test certificate or the project-related approval. This declarationof conformity is given by marking the construction product with the national conformity mark (Ü-Zeichen).
Cf. Section21 MBO.
A prerequisite for the declaration of conformity is that the manufacturer has set up a factory production control system to ensure that the construction product complies with the relevant technical rules. Where required, the manufacturer must also use the services of a recognised testing laboratory or an inspection or certification body.
The requirements for the confirmation of conformity are specified in the verification of fitness for use or in the Technical Building Rules. The following abbreviations are used in the Technical Building Rules:
- ÜH: Declaration of conformity by the manufacturer (without involvement of a testing, inspection or certification body)
- ÜHP: Declaration of conformity by the manufacturer after prior testing of the construction product by a recognised testing laboratory
- ÜZ: Certificate of conformity by a recognised certification body with external monitoring of the factory production control by a recognised inspection body.
- pdf-Datei Verzeichnis der Prüf-, Überwachungs- und Zertifizierungsstellen nach den Landesbauordnungen (PÜZ-Verzeichnis) (100 pages ) Stand: 1. Januar 2024; Ausgabe 2024; Letzte redaktionelle Überarbeitung: 8. Mai 2024
The national conformity mark (Ü-Zeichen) is affixed toconstruction products which comply with the Technical Building Rules or a verification of fitness for use, e.g. a national technical approval. Other construction products as well as construction techniques are not marked in this way.
The executing party is obliged to provide a confirmation of conformity of the construction technique with the Technical Building Rules, the general construction technique permit, the national test certificate or the project-related construction technique permit.
Cf. Section16a(5) in conjunction with Section21(2) MBO.
The executing company issues a declaration of conformity in which it declares that the construction technique complies with the Technical Building Rules, the general construction technique permit, the national test certificate or the project-related construction technique permit.
Note: Construction techniques are not subject to national conformity marking.
DIBt can provide evaluations for economic actors who wish to provide evidence on a voluntary basis that the German requirements for construction works are met when using their harmonised (CE-marked) construction product.
Such verification is recommended in cases where the harmonised construction product standards do not fully reflect the national requirements for construction works.
The procedure for providing voluntary product performance information in the technical documentation of a harmonised construction product is set out in Chapter D3 of the Administrative Provisions – Technical Building Rules. The harmonised construction product standards concerned can be found in the Priority list for the revision of deficient harmonised construction product standards.
More information on DIBt evaluations